HOME > STOCK

> PRESSING-AND-PACKING-SYSTEMS > MEMBRANE-PRESS > ITALPRESSE - LOCK-FORM-3D-PIN-EVOLUTIONS

Product look-up
Code  
 
Type 
Brand 
 
Model 
 
MEMBRANE PRESS  
Brand ITALPRESSE Model LOCK - FORM 3D PIN EVOLUTIONS
Send us your request for an offer Call Ferwood 616-803-0207
Code W2941
 
 
MEMBRANE PRESS   ITALPRESSE   LOCK FORM 3D PIN EVOLUTIONS
Gallery
Video
Layout
Technical
data sheet
   
 

2011 USED ITALPRESSE THERMOFOIL MEMBRANE PRESS W/ PIN SYSTEM

Model: LOCKFORM PSS

LOCKFORM utilizes both vacuum below the film and positive air pressure above the film to form the film into even the most detailed profile with superior definition. Deep, intricate profiles and recessed finger pulls are no problem for the LOCKFORM. Machines that work with only membrane or with vacuum only cannot make this claim.

Heating platen dimensions 1,450 x 2,800 mm (57 x 110)
Maximum lamination area 1,334 x 2,684 mm (52.5 x 105.6)
Maximum panel thickness (W/Pin Support) 30 mm (1.18)
PVC foil width 1,420 -1,450 mm (55.9 – 57)
Total laminating pressure 180 metric tons (198 US tons)
Maximum platen temperature 150C (302F)
PIN SUPPORT SYSTEM

The Pin Pedestal eliminates the expense and hassle of pedestal panels. Setting the pins is completely manual. There are no complicated electronics or pneumatic components to maintain. Just push down one row of pins around each panel. All the remaining pins stay in the up position. At the end of the press cycle the operator can choose to have all of the pins automatically reset to the up position or leave them as set.

TOUCH SCREEN COMPUTER CONTROL

The Touch Screen computer control system for entry and management of all press cycle parameters - time, pressure, and temperature

Press weight: 13,000 kg (28,600 lbs.)

Removal, loading and shipment to be discussed as this unit is still under power.
NEWS
26/08/2018
  Read all